|
|||
|
Testing tools |
|||
| This is a program to test the RS-232 port output of the Doppler. | |||
| http://www.silcom.com/~pelican2/PicoDopp/PICODOPP.htm | |||
| look for WinDopp IBM PC. | |||
|
Schematic of the wiring from the Doppler to the PC: |
|||
|
|
|||
|
Réal VE2DSK at home is receiving VE2RXW à 126º. |
|||
|
|
|||
|
What the Doppler give : |
|||
|
|
|||
|
The program interpretation : |
|||
|
|||
|
Windopp v1.0 |
|||
|
|
|||
|
What is generated by the Doppler : |
|||
|
|
|||
| N.B.: The doppler gives an Agrello message format %AAA/F, where AAA is the received | |||
| angle, F the quality factor. | |||
| N.B.: To minimize lecture errors, configure the program with the same data as the | |||
| Doppler (baud rate, com port). | |||
| N.B.: Only the APRS position of the Doppler gives you this data when you push the | |||
| menu button. | |||
